How to use
- Pick a common resolution such as FHD, QHD or 4K under Resolution, or type the width and height in pixels.
- Enter the diagonal size in inches, the number in a monitor’s name (27-inch), a laptop’s spec (15.6-inch) or a phone’s spec (6.1-inch).
- Read the PPI, the real width x height in cm, the aspect ratio and the dot pitch.
- The table below shows how PPI changes at the same diagonal when the resolution goes from HD to 8K.
Formulas
- Diagonal in pixels = sqrt(width² + height²)
- PPI = diagonal in pixels / diagonal in inches
- Real width (inches) = diagonal inches x width px / diagonal px, and the same for height
- 1 inch = 2.54 cm, and dot pitch (mm) = 25.4 / PPI
For 1920 x 1080 the diagonal is 2,202.9 pixels, so on a 24-inch screen it is 2,202.9 / 24 = 91.79 PPI. A 600 x 800 screen of 10 inches has a diagonal of exactly 1,000 pixels, so it is 100 PPI, 6 inches (15.24 cm) wide and 8 inches (20.32 cm) tall.
PPI of common screens
| Screen | Resolution | PPI | Width x height (cm) |
|---|---|---|---|
| 24 inch | 1920 x 1080 | 91.79 | 53.1 x 29.9 |
| 24 inch | 2560 x 1440 | 122.38 | 53.1 x 29.9 |
| 27 inch | 1920 x 1080 | 81.59 | 59.8 x 33.6 |
| 27 inch | 2560 x 1440 | 108.79 | 59.8 x 33.6 |
| 27 inch | 3840 x 2160 | 163.18 | 59.8 x 33.6 |
| 32 inch | 3840 x 2160 | 137.68 | 70.8 x 39.8 |
| 34 inch | 3440 x 1440 | 109.68 | 79.7 x 33.3 |
| 15.6 inch | 1920 x 1080 | 141.21 | 34.5 x 19.4 |
| 13.3 inch | 1920 x 1080 | 165.63 | 29.4 x 16.6 |
| 55 inch | 3840 x 2160 | 80.11 | 121.8 x 68.5 |
| 65 inch | 3840 x 2160 | 67.78 | 143.9 x 80.9 |
At the same size, a different resolution leaves the physical dimensions unchanged and only moves the PPI. At the same resolution, a bigger screen has a lower PPI, which is why a 27-inch FHD monitor looks coarser than a 24-inch one.
Comparing resolutions
At a fixed diagonal, PPI is proportional to resolution. With FHD (1920 x 1080) as 1, HD is 0.67x, QHD 1.33x, 4K 2.00x, 5K 2.67x and 8K 4.00x. On 27 inches that is 54.4, 81.6, 108.8, 163.2, 217.6 and 326.4 PPI. The dot pitch of 4K is 0.156 mm, half of FHD’s 0.311 mm. How sharp a screen looks also depends on viewing distance, eyesight and panel type, so this tool stops at the numbers.
Common mistakes
- Reading inches as width. A monitor’s inch size is its diagonal. A 27-inch 16:9 screen is about 59.8 cm wide, not 68.6 cm (that is the diagonal).
- Comparing different aspect ratios at the same inches. An ultrawide is shorter at the same diagonal. A 34-inch 3440 x 1440 is about 33.3 cm tall, close to a 27-inch 16:9.
- Using PPI and DPI interchangeably. PPI counts screen pixels per inch and DPI counts printed dots per inch, though people mix them. For print sizes use the Paper Size Converter.
- Entering the scaled resolution. Use the panel’s native resolution, not the smaller logical resolution you see at 150% scaling.
- Treating the advertised inches as exact. Manufacturers round, so the real diagonal can differ a little.
Frequently asked questions
What is the PPI of a 27-inch 4K monitor?
163.18 PPI: the 3840 x 2160 diagonal of 4,406.2 pixels divided by 27. At 27 inches QHD is 108.79 PPI and FHD is 81.59 PPI.
Can I get width and height from the diagonal?
Yes, when you know the aspect ratio. For 16:9, width = diagonal x 0.8716 and height = diagonal x 0.4903. A 27-inch screen is 59.8 x 33.6 cm. The tool computes it exactly from your resolution.
Is a higher PPI always better?
Pixels packed tighter make text and lines smoother, but at the same resolution a higher PPI shrinks text so you may need to raise the operating system scaling. Price and graphics load go up as well.
What is the difference between 16:9 and 16:10?
At the same width a 16:10 screen is taller. 1920 x 1080 is 16:9 and 1920 x 1200 is 16:10. The tool shows both the reduced ratio and the usual name.
Does it work for phone screens?
Yes. You only need the diagonal and the resolution. A 6.1-inch screen at 2532 x 1170 is 457.25 PPI.
Where do I find the diagonal size?
Use the screen size in the product specification. If you measured the diagonal in cm, divide by 2.54 to get inches.
Is what I type sent to a server?
No. All calculations run in your browser and nothing is sent to a server.
Related tools
- Work out proportions on their own with the Ratio Calculator.
- Find pixel sizes for social posts in the Social Image Size Guide.
- Convert inches and centimeters with the Length Converter.
- See how print size relates to pixels in the Paper Size Converter.
- Convert many units in one place with the Unit Converter.
What you type is processed only in your browser and is never sent to a server.