1. Home
  2. Calculate
  3. Download Time Calculator

Download Time Calculator

How long does 4 GB take at 100 Mbps? Or what speed finishes in 10 minutes?

Runs in your browser · No upload
%
0 to 20%. The speed is reduced by this share to allow for headers, retransmission and line conditions.
Bit-based speeds such as Mbps always use 1,000 whichever you pick. KB/s and MB/s follow the chosen base.
Estimated time
5 min 20 s
100 Mbps shown = 12.5 MB per second
Total seconds
320
Bits to transfer
32,000,000,000
Effective speed (Mbps)
100
Effective speed (MB/s)
12.5
Same file at common speeds
SpeedMB/sTime
10 Mbps1.2553 min 20 s
50 Mbps6.2510 min 40 s
100 Mbps12.55 min 20 s
300 Mbps37.51 min 47 s
500 Mbps62.51 min 4 s
1,000 Mbps12532 s
Real downloads can be slower than the calculation because of server speed, Wi-Fi quality and other traffic. The result is a theoretical figure.

How to use

  1. In Time it takes, enter the file size and its unit (B, KB, MB, GB, TB) and the connection speed and its unit (Kbps, Mbps, Gbps, KB/s, MB/s, GB/s). The estimated time appears.
  2. Switch to Speed you need to do the reverse: enter the file size and a target time in hours, minutes and seconds, and see how many Mbps or MB/s finish the job in time.
  3. Overhead allowance goes from 0 to 20% and defaults to 0. Whatever you enter is taken off the speed before calculating.
  4. Unit base chooses between base 1000 (KB = 1,000 B) and base 1024 (KiB = 1,024 B). Windows Explorer shows base 1024 values labeled GB.

Bits and bytes, Mbps and MB/s

Internet providers quote speed in bits, while file sizes and the speed shown in a download window are usually in bytes. One byte is 8 bits, so the numbers differ by a factor of 8.

Advertised speed Received per second Time for 1 GB
10 Mbps 1.25 MB/s 800 s (13 min 20 s)
100 Mbps 12.5 MB/s 80 s (1 min 20 s)
500 Mbps 62.5 MB/s 16 s
1 Gbps 125 MB/s 8 s

A lowercase b is a bit and an uppercase B is a byte. Mbps is megabits per second, MB/s is megabytes per second. If a 100 Mbps line shows about 12.5 MB/s in a download window, you are using nearly all of it.

Formulas

  • Transfer time (s) = file size in bits / speed in bits per second
  • File size in bits = file size in bytes x 8
  • With overhead, effective speed = shown speed x (1 - overhead %)
  • Speed needed = file size in bits / target time / (1 - overhead %)

Worked examples

File Speed Time
4 GB 100 Mbps 320 s (5 min 20 s)
4 GB 100 Mbps, 10% overhead 355.6 s (5 min 56 s)
4 GB 100 Mbps, 20% overhead 400 s (6 min 40 s)
50 GB 500 Mbps 800 s (13 min 20 s)
700 MB 10 Mbps 560 s (9 min 20 s)
1 TB 1 Gbps 8,000 s (2 h 13 min 20 s)
1 GB (base 1024) 100 Mbps 85.9 s (1 min 26 s)

In reverse, finishing 10 GB in 10 minutes needs 133.33 Mbps (16.67 MB/s), or 148.15 Mbps if you allow 10% overhead.

Why allow for overhead?

Data carries addresses and control information (headers), some of it is sent again, and Wi-Fi or the server may not deliver the line’s top speed. The loss varies by environment, so there is no fixed figure. The default is 0% (the theoretical value); if you want some margin, try 5 to 10%. Treat it as a rough guide and check the real speed of your line with the Internet Speed Test.

Common mistakes

  • Reading Mbps as MB/s. A 500 Mbps line gives 62.5 MB per second, not 500.
  • Using download speed for an upload. Home lines often upload more slowly. Use the upload speed for files you send.
  • Mixing base 1000 and base 1024. The same “1 GB” is 1,000,000,000 bytes or 1,073,741,824 bytes, a 7.4% difference.
  • Sharing the line. When several devices use one connection, your share of the speed shrinks.

Frequently asked questions

How long does 1 GB take on a 100 Mbps connection?

80 seconds (1 minute 20 seconds) in theory. 100 Mbps is 12.5 MB per second, and 1,000 MB divided by 12.5 is 80.

How long does a 100 GB game take on gigabit internet?

1 Gbps is 125 MB per second, so 800 seconds (13 minutes 20 seconds) in theory. Slower servers or drives make it longer.

How do I convert Mbps to MB/s?

Divide by 8 for MB/s, multiply by 8 for Mbps. 100 Mbps is 12.5 MB/s and 40 MB/s is 320 Mbps.

What speed do I need to finish in a set time?

Use Speed you need with the file size and target time. Downloading 50 GB in 30 minutes needs 222.22 Mbps (27.78 MB/s).

Why does it take longer in practice?

Server limits, Wi-Fi signal, the router, other devices and protocol headers all add up. Entering 5 to 10% in the overhead box brings the result closer to real life.

Why use 1024 instead of 1000 for KB, MB and GB?

Operating systems and memory traditionally count in 1024, while storage makers and networks count in 1000. Choose base 1024 to match the size shown in your file manager.

Is what I type sent to a server?

No. All calculations run in your browser and nothing is sent to a server.

What you type is processed only in your browser and is never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.