1. Home
  2. Calculate
  3. Water Bill Calculator

Water Bill Calculator

Enter your local rates to calculate water and sewage charges by tier.

Runs in your browser · No upload
㎥
Pick the one your municipality’s tariff describes.
Water supply tiers (example)
$/㎥
$/㎥
Tier 3 Limit (m³)
everything above
$/㎥
$
Depends on the meter size. The default is an example.
$/㎥
㎥
If empty, the water usage is used.
$/㎥
Use 0 if it does not apply to your river basin.
Estimated water bill
$76.25
25 m³, tier 2
ItemCalculationAmount
Water supply charge Tier 120㎥ × 0.9$18.00
Water supply charge Tier 25㎥ × 1.5$7.50
Basic fee$12.00
Sewage charge25㎥ × 1.2$30.00
Water use charge25㎥ × 0.35$8.75
Total$76.25
Average per m³
$3.05
Water tariffs are set by municipal ordinance, so rates and tiers differ by area. The defaults are examples of the method; replace them with the figures from your bill or your city’s tariff. Household tap water is usually VAT-exempt so VAT is not calculated. This is an estimate only.

How to use

  1. Enter the usage directly, or switch to Meter readings and enter the previous and current readings; the difference is the usage.
  2. Look up your area’s water and sewage tariff and enter the tier limits and the rate per m³. The default tiers are example rates.
  3. Choose how tiers apply. Municipalities describe this differently, so follow your tariff notice.
  4. Add the basic fee, the sewage rate and the water use charge to get the line-by-line total.
  5. The currency starts from your country. If you pick another currency, the amounts you entered are converted at live exchange rates.

What makes up the bill

Item Calculation
Water supply charge usage priced by tier (see below)
Basic fee monthly flat fee by meter size
Sewage charge sewage volume × sewage rate (defaults to the water usage)
Water use charge usage × charge per m³ (only in certain river basins)
Total everything added (rounded down to 10 won when the currency is KRW, to the cent otherwise)

Two ways tiers are applied

  • Per tier: the higher rate applies only to the usage above each limit. With the example tiers ($0.90 up to 20 m³, $1.50 up to 40 m³, $2.30 above), 25 m³ costs 20 × 0.90 + 5 × 1.50 = $25.50.
  • Tier rate on everything: the rate of the tier your usage reaches applies to all of it. The same 25 m³ becomes 25 × 1.50 = $37.50.

Why you enter the rates

Water is not priced nationally. Municipal ordinances set the tiers, rates and basic fees for each city or county, sewage has its own rate, and areas in the Han, Nakdong, Geum, Yeongsan and Seomjin river basins pay a water use charge. A single built-in table would be wrong for most people, so the fields only hold example prices. Take real figures from your bill or from your local waterworks office’s tariff.

Example

Using the example rates (limits 20 and 40 m³, $0.90, $1.50 and $2.30 per m³, basic fee $12, sewage $1.20 per m³, water use charge $0.35 per m³):

Usage Method Supply charge Total
25 m³ Per tier $25.50 $76.25
25 m³ Tier rate on everything $37.50 $88.25
45 m³ Per tier $59.50 $141.25

If the meter went from 1,234 to 1,259, usage is 25 m³. If a meter was replaced or rolled over so the current reading is lower, enter the usage directly.

Good to know

FAQ

How is a water bill calculated?

Add the water supply charge, basic fee, sewage charge and water use charge. The supply charge applies your municipality’s tier rates to the usage.

How much is the sewage charge?

It varies by municipality and is usually the sewage rate times the water usage. If you also use other water such as a well, the volume can differ, so there is a separate field.

Does every household pay the water use charge?

No. It applies only in certain river basins to protect water sources. Enter 0 if it does not apply to you.

How do I get usage from meter readings?

Subtract the previous reading from the current one. Both are printed on the bill.

Is my data stored?

No. Everything is calculated in your browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.