1. Home
  2. Calculate
  3. Taxi Fare Calculator

Taxi Fare Calculator

Enter your city’s fare structure to estimate a fare or the distance a budget buys.

Runs in your browser · No upload
Local fare structure (example values)
Defaults only show how the calculation flows. Replace them with the fare table for your area and taxi type.
$
$
$
This trip
km
min
Total time spent below roughly 15 km/h or standing still. The threshold varies by region.
%
Night, out-of-city and similar. Does not apply to call fee or tolls.
$
$
Estimated taxi fare
$22.00
10 km, 5 min slow
ItemCalculationAmount
Base fare$3.50
Distance fare64 × 0.25$16.00
Time fare10 × 0.25$2.50
Meter fare$22.00
Meter fare with surcharge$22.00
Total$22.00
Taxi fares depend on the city, taxi type and time of day, so this tool does not set rates for you. The defaults are arbitrary example rates, not any city’s fare table. Real meters alternate between distance and time depending on speed, so the result is a rough estimate. Check your city’s fare notice for exact figures.

How to use

  1. Look up the fare table for your area and taxi type and enter the base fare, base distance, the distance step and its fare, and the time step and its fare. The defaults are examples.
  2. Fare from distance: enter the trip distance in km and the time spent slow or stopped, in minutes. You can also add a night or out-of-city surcharge, a call fee and tolls.
  3. Distance from budget: enter an amount and the tool works out how far it takes you.
  4. The table shows how the base fare, distance fare, time fare and surcharge add up.
  5. The currency starts from your country. If you pick another currency, the amounts you entered are converted at live exchange rates.

How it is calculated

A taxi meter starts at the base fare, then adds an amount for each distance step after the base distance, and for each time step while moving slowly or standing still. The tool simplifies this and adds the parts.

Item Calculation
Distance fare whole steps in (distance - base distance) × fare per step
Time fare whole steps in the slow time (seconds) × fare per step
Meter fare base fare + distance fare + time fare
Surcharge meter fare × surcharge %, with an optional rounding to 100 when the currency is KRW (other currencies round to the cent)
Total meter fare with surcharge + call fee + tolls

Call fees and tolls are not surcharged, so they are added at the end. A real meter switches between distance and time depending on speed, so the result is a rough estimate, not an exact fare.

Why you enter the rates

Taxi fares are not national. Local governments set them by area, taxi type (standard, deluxe, large) and time of day, so the base fare, base distance, steps and surcharges can all differ, and increases happen at different times. This tool therefore does not set rates. The defaults are arbitrary example rates (a $3.50 base fare that includes 1.6 km, then $0.25 per 131 m and per 30 seconds of slow time; the Korean page starts from a base fare of 4,800 KRW in the same structure), so they are examples. Find the exact values on your city’s taxi fare notice.

Example

With the example rates (base fare $3.50, base distance 1.6 km, $0.25 per 131 m, $0.25 per 30 seconds), this tool calculates:

Case Calculation Fare
10 km, 5 min slow 3.50 + 64 distance steps 16.00 + 10 time steps 2.50 $22.00
Same, 20% surcharge 22.00 × 1.2 $26.40
Same, 40% surcharge 22.00 × 1.4 $30.80
1 km (within base distance) base fare only $3.50

With a call fee of $2 and a budget of $20, and no slow time, you can go about 9.198 km. One more distance step (131 m) would make it $20.25, over the budget.

Good to know

  • Check the notice for the surcharge percentage that applies in your area and time. The buttons set 0, 20 or 40% in one tap.
  • App-dispatched or platform taxis have their own fare and fee structure and may not match this tool.
  • For the cost of driving yourself see the Fuel Cost Calculator, for speed units the Speed Converter, and for adding percentages the Percent Calculator.
  • This is an estimate. The meter is the final fare.

FAQ

How is a taxi fare calculated?

The base fare plus charges for distance beyond the base distance and for slow or stopped time, with a surcharge where it applies.

What is the night surcharge?

It varies by area and hour. Enter the announced percentage in the surcharge field.

Are call fees and tolls surcharged?

No. The tool applies the surcharge to the meter fare only and adds the call fee and tolls unchanged.

Can I find out how far a budget goes?

Switch to Distance from budget and enter an amount. It finds the last distance that keeps the fare within it.

Is my data stored?

No. Everything is calculated in your browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.