1. Home
  2. Developer
  3. Internet Speed Test

Internet Speed Test

Measure download, upload, ping and jitter in one run.

For every format and option in one place, use Network Diagnostics →

Talks to an outside test server · no input or files sent
This tool exchanges random data with Cloudflare's speed test server. Nothing you type and no files are sent, and that server will see your IP address.
The test starts only when you press the button. It uses up to about 83 MB (download and upload combined), and less on a slow connection. If you are on mobile data, run it on Wi-Fi.
Mbps means megabits per second. The MB/s you see for file transfers is Mbps divided by 8.
This is the speed to the nearest Cloudflare location. It can differ from your plan's full speed or from the speed to a particular game or video server. Wi-Fi quality, other apps and browser extensions also affect it.

How to use

  1. Read the notice at the top and the data usage line. The test never starts on its own.
  2. Press Start test. It runs latency, then download, then upload, with a progress bar.
  3. Press Stop at any time. Whatever was measured so far stays on screen.
  4. When it finishes you get download and upload speed (Mbps), ping and jitter. Copy result gives you plain text, and Test again runs another round.

For steadier numbers, pause video streaming, large downloads and cloud sync while the test runs.

What it measures

Item Meaning How
Ping (latency) Time from sending a request to getting the reply 10 empty requests, median taken. The first request is dropped because it includes connection setup
Jitter How much ping jumps around Average difference between consecutive pings. Lower is steadier
Download Speed from the server to your device Fetches 100 KB, 1 MB, 10 MB and 25 MB files in growing steps, then takes the median and top 10% for each size
Upload Speed from your device to the server Sends random data in 100 KB, 1 MB and 10 MB pieces

Speed is bytes x 8 / seconds / 1,000,000, giving Mbps (megabits per second). From the elapsed time the tool subtracts the server’s own processing time (the server-timing response header) and the round-trip latency, so distance does not leak into the speed figure. The large number on screen is the 90th percentile of samples whose transfer took at least 0.1 seconds. It is meant to reflect what the line can sustain, not a single lucky peak.

Bigger files are used only on fast connections. A step moves on to the next size only if its requests finish in under a second at the median. A slow connection therefore uses less data.

Data usage and who it talks to

  • On a fast connection that runs every step, it moves 59.6 MB down and 23.5 MB up, about 83 MB at most. A slow connection uses less, and the actual amount appears as “Data used” below the result.
  • On mobile data this counts against your plan. Use Wi-Fi when you can.
  • Your browser talks to speed.cloudflare.com directly, not through this site’s server.
  • Only randomly generated bytes are sent. Nothing you type and no files leave your device, but that server does see your IP address, as any site you visit would.
  • Results are not stored.

Reading the result

The number is the speed from your browser to the nearest Cloudflare location. It can differ from your plan’s advertised speed (for example a 1 Gbps plan) and from what you feel in practice.

  • The path to a game server, a video service or your office can differ from the path to a Cloudflare location.
  • Weak Wi-Fi, a distant router or many connected devices lower the result. Testing again over a cable helps separate the cause.
  • Other apps, a VPN, or ad-blocking and security extensions can reduce it.
  • The test uses a single browser connection, so very fast lines above 1 Gbps may read lower than they really are.
  • The same line gives different numbers at different times of day. Run it two or three times and compare.

Mbps is megabits per second. The MB/s you see in file transfers is Mbps divided by 8, so 100 Mbps is 12.5 MB/s. Time to download a 1 GB file (decimal) at these speeds:

Speed Time for 1 GB
50 Mbps 2m 40s
100 Mbps 1m 20s
500 Mbps 16s
1,000 Mbps 8s

For unit conversions, see the Data Size Converter and the Speed Converter.

Frequently asked questions

How do I check my internet speed?

Press Start test on this page. There is nothing to install or sign up for, and it usually takes about a minute, depending on your line. For the most accurate reading, stop other downloads and streaming, and test close to the router or over a cable.

What is a good ping?

Lower is faster. A wired line to a nearby server usually reads low, while Wi-Fi and mobile tend to be higher and less steady. For real-time games and video calls, low jitter (how much ping varies) often matters more than the ping itself.

Why are upload and download speeds different?

Many home lines are built with a much lower upload than download. Unless you have a symmetric fiber plan, a lower upload is normal. Uploading video, video meetings and cloud backups depend on it.

My result is far below my plan speed.

Usually it is a mix of Wi-Fi quality, other devices, time of day and the limits of a single-connection test. Connect by cable and test again. If it is still low after restarting the router, you can copy this result and show it to your provider. It measures the path to Cloudflare, though, so it is not an official figure for disputes.

How much data does the test use?

Up to about 83 MB on a fast connection. A slow connection skips the large-file steps and uses less. If your mobile plan is limited, run it on Wi-Fi.

Is my information sent anywhere?

Nothing you type and no files are sent. Your browser exchanges random data with Cloudflare’s speed test server, and that server sees your IP address. You can see how your IP appears with What Is My IP and the location it suggests with IP Geolocation.

The test fails or stalls.

Check your internet connection. Ad blockers, security extensions, corporate firewalls and some DNS filters can block speed.cloudflare.com, and then the test cannot run. Turn the extension off or try another network. If the server briefly blocked you for too many requests, wait a little and try again.

This tool never sends what you type or any files. It only exchanges the random data needed for the measurement with Cloudflare’s speed test server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.