How to use
- Open the page. It makes one lookup of your connection and shows your public IP address at the top.
- Use the Copy button next to the address for the IP alone, or Copy all for the location, ISP and connection details together.
- If you are about to share your screen or take a screenshot, switch on Hide the IP on screen. The copy buttons still copy the real address.
- After turning a VPN on or off, press Check again to see what changed.
What you will see
| Item | Meaning |
|---|---|
| IP address / version | The public address the internet sees for you, either IPv4 (dotted) or IPv6 (colons), whichever this connection used |
| Approximate location | Country, region and city estimated from the IP address |
| Time zone | The time zone of that location. If it differs from your browser’s, a note appears |
| ISP (ASN) | The company that manages the address and its autonomous system number, such as AS4766 |
| Protocol and TLS | How you reached this page (HTTP/2, HTTP/3 and so on) and the encryption version |
| Server location code | A code for the nearby server site that received your request |
Why you may have two different IPs
An address like 192.168.0.10 is a private IP used only inside your home or office network. This tool shows the public IP that the outside world sees. Devices behind the same router usually share one public IP. Many ISPs rotate public addresses (dynamic IP), so it can change after a few days. On mobile data, many customers often share one public address.
With hiding switched on, 203.0.113.7 is displayed as 203.0.•••.•••.
Why the location can look wrong
- The location is not GPS. It is estimated from where the IP range is registered, so it can be wrong even at the city or state level.
- With a VPN or proxy, you will see the country and city of that server.
- Results often point to an ISP headquarters or a regional hub rather than your town.
- It does not reveal a street address. For a precise position, a site has to ask your browser for its separate location permission.
What goes to the server, and the limits
The tool shows back what the server reads from your own request, so there is nothing to type, and one lookup happens when the page opens. The server uses the value only to build the response. It is not stored, and nothing is kept in your browser’s localStorage. Requests are rate limited per IP each minute, so pressing the button too often can block you for a short while. If you have both IPv4 and IPv6, only the one your browser chose is visible. This is not a tool for tracking other people or for putting load on a service.
FAQ
How do I find my IP address?
Just open this page. It appears right away with no typing or sign-up. Press Copy to put it on your clipboard.
What is the difference between a public and a private IP?
Private IPs (192.168.x.x, 10.x.x.x) work only inside a home or office network. A public IP is how you appear on the internet. This tool shows the public one.
Is it dangerous if someone sees my IP address?
An IP alone does not reveal your home address, but it shows your rough region and ISP, and combined with logs it can help identify you. On sensitive networks use a VPN, and hide the IP before sharing your screen.
I turned on a VPN but still see my real IP.
Some VPNs only route part of the traffic, or send IPv4 through the VPN while IPv6 goes out directly. Use the IPv6 check to see whether you are also connecting over IPv6.
Can other sites see this too?
Every site you visit receives the same IP and the headers your browser sends. To learn who owns another address, try the IP address lookup, and for browser details use the User-Agent parser.
Your IP passes through the server only to be shown on screen, and it is not stored. Unlike most tools here, this one needs a server, so a request is sent.