How to use
- Open the page. It checks once whether you reached it over IPv6 or IPv4 and shows the result at the top. You can copy the address below it.
- To test a domain, type something like
google.comin the box and press Check. If you paste a full URL from the address bar, only the host is extracted. - The result shows a verdict plus the AAAA (IPv6) and A (IPv4) addresses with their TTLs and any CNAME path.
- After changing something (router IPv6 settings, VPN), press Check again.
What the verdicts mean
| Result | Meaning |
|---|---|
| Supports both IPv4 and IPv6 | Both A and AAAA records exist (dual stack). Many large services look like this |
| Supports IPv6 only | Only AAAA exists. It may be hard to reach from IPv4-only networks |
| No IPv6 (AAAA) record | Only A exists. IPv6-only networks need a translation device to reach it |
| No address at all | The domain exists but has no web address records (a mail-only domain, for example) |
| Domain does not exist | DNS answered NXDOMAIN |
An IPv6 address is eight groups of hexadecimal separated by colons, such as 2606:4700::1, and public internet addresses fall in 2000::/3 (they start with 2 or 3). If an AAAA record holds a private (ULA) address such as fd00::1, it cannot be reached from outside, so the tool warns about it. To convert between the two address formats, use the IPv4 to IPv6 converter.
Limits of this check
- Only the side your browser picked is visible. On a network with both IPv4 and IPv6, the browser picks whichever connects faster. IPv4 here is not proof that IPv6 is off, and IPv6 here does not mean IPv4 is broken.
- The connection result is for reaching this server (toolulah.com). Another site may show a different one, depending on its own IPv6 support.
- An AAAA record only means an IPv6 address is registered in DNS. It does not confirm that the server really accepts web traffic over IPv6.
- Domain lookups come from a server-side DNS resolver, so a record you just changed can show up late because of caching (TTL).
- For your IP’s location or ISP, see What is my IP, and for the network an IP belongs to, the IP address lookup.
What goes to the server
One lookup of how you connect happens when the page opens, and the domain you type is sent to a server for the DNS query. Neither is stored or kept in your browser. The server stops waiting after 8 seconds, and requests are limited per IP each minute. It is not a tool for loading other people’s sites or scanning ports.
FAQ
How can I tell whether I am using IPv6?
The top of this page says “Connected over IPv6” or “Connected over IPv4”. When it is IPv6, the address shown contains colons.
It says IPv4. Does that mean IPv6 does not work?
Not necessarily. On a dual-stack network the browser may choose IPv4. To use IPv6, your ISP and router both need to support it and have it turned on.
How do I enable IPv6 for my domain?
Set up your server or CDN to accept an IPv6 address, then add an AAAA record in DNS. Look the domain up with this tool afterwards.
What is an AAAA record?
A DNS record that points a domain name to an IPv6 address. The record that points to an IPv4 address is A.
Is IPv6 safer or faster?
It is not automatically safer. Its structural advantage is plenty of addresses, so no address sharing (NAT) is needed, and speed depends on the network and server, so no general claim holds.
The domain you enter goes through the server only for the DNS query and is not stored.