1. Home
  2. Developer
  3. IPv4 to IPv6 Converter

IPv4 to IPv6 Converter

Convert IPv4 to IPv6 notations and compress, expand or decode IPv6 addresses.

For every format and option in one place, use Network Diagnostics →

Runs in your browser · No upload
Enter an IPv4 address to get its IPv6 forms, or an IPv6 address to see compressed, expanded and reverse names and any embedded IPv4.
Defaults to the well-known prefix 64:ff9b::/96. Only lengths 32, 40, 48, 56, 64 and 96 are allowed (RFC 6052).
TypeAddressOther notationNotes
IPv4-mapped::ffff:c000:201::ffff:192.0.2.1The ::ffff:0:0/96 form IPv6 sockets use to represent an IPv4 connection. Not a routable address.
IPv4-compatible (deprecated)::c000:201::192.0.2.1Deprecated by RFC 4291. Do not use it in new configuration.
6to4 block2002:c000:201::/482002:c000:0201:0000:0000:0000:0000:0000/48Each IPv4 address owns a 2002:xxxx:xxxx::/48 block. Effectively retired by RFC 7526.
NAT64 (/96)64:ff9b::c000:20164:ff9b::192.0.2.1The address DNS64 synthesizes so an IPv6-only network can reach an IPv4 server.

How to use

  1. Enter an IPv4 address such as 192.0.2.1 and a table shows four IPv6 notations: IPv4-mapped, IPv4-compatible, 6to4 and NAT64. Each address has its own copy button.
  2. Enter an IPv6 address instead to see the compressed form (RFC 5952), the expanded form, the mixed IPv4 notation, the ip6.arpa reverse name and the address type. If an IPv4 address is embedded, it is pulled out for you.
  3. To use a NAT64 prefix other than the well-known one, edit the NAT64 prefix field. Only lengths 32, 40, 48, 56, 64 and 96 are valid.

The conversions

Results for 192.0.2.1:

Type Result Used for
IPv4-mapped ::ffff:c000:201 (mixed ::ffff:192.0.2.1) an IPv6 socket representing an IPv4 connection
IPv4-compatible ::c000:201 deprecated by RFC 4291, do not use in new setups
6to4 2002:c000:201::/48 old tunnel scheme giving each IPv4 address a /48
NAT64 64:ff9b::c000:201 IPv6-only networks reaching IPv4 servers

You rarely type mapped addresses yourself, but you see them in server logs: a dual-stack server records an IPv4 client as ::ffff:203.0.113.5. When you put such a client in a firewall or allow list, use the dotted IPv4 form instead.

NAT64 layout by prefix length (RFC 6052)

With a /96 prefix the IPv4 address sits unchanged in the last 32 bits. With shorter prefixes bits 64 to 71 (the u octet) must stay zero, so the IPv4 address is split in two parts. Embedding 192.0.2.33 gives:

Prefix length Result
/32 (2001:db8::/32) 2001:db8:c000:221::
/40 2001:db8:1c0:2:21::
/48 2001:db8:122:c000:2:2100::
/56 2001:db8:122:3c0:0:221::
/64 2001:db8:122:344:c0:2:2100::
/96 2001:db8:122:344::192.0.2.33

The longer-than-32 rows use the prefix 2001:db8:122:344:: cut to that length. Enter an IPv6 address and the same prefix to extract the IPv4 address in reverse; the well-known 64:ff9b::/96 is always checked, so 64:ff9b::808:808 yields 8.8.8.8.

IPv6 compression rules

Per RFC 5952 only the longest run of zero groups is replaced by ::, the first one wins a tie, and a single zero group is never shortened. Leading zeros are dropped and hex digits are lowercase. 2001:0db8:0000:0000:0001:0000:0000:0001 becomes 2001:db8::1:0:0:1.

Frequently asked questions

Will an IPv4 address written as IPv6 connect to the same server?

No. Only the notation changes; the server does not necessarily answer on that address. Mapped addresses are not routable, and 6to4 and NAT64 need a tunnel provider and a NAT64 gateway respectively.

What is an address starting with ::ffff: ?

An IPv4-mapped IPv6 address. The last 32 bits are the IPv4 address, also written in dotted form such as ::ffff:192.0.2.1. Paste it here and the embedded IPv4 is shown.

Is 6to4 still used?

Hardly. RFC 7526 deprecated the 6to4 relay anycast address, so it is effectively retired. Keep it in mind when reading old configuration.

What is the ip6.arpa name for?

It is the name of an IPv6 address’s PTR (reverse DNS) record: the address expanded to 32 hex digits, reversed and joined with dots.

For network-level math use the IP Subnet Calculator and the CIDR Calculator, and to see an address in binary try the Number Base Converter. Addresses you enter are processed in your browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.