1. Home
  2. Developer
  3. IP Subnet Calculator

IP Subnet Calculator

Calculate and split network ranges from CIDR or a subnet mask.

For every format and option in one place, use Network Diagnostics →

Runs in your browser · No upload
IPv4 and IPv6 both work. Without a prefix, IPv4 uses /24 and IPv6 uses /64.
Network (CIDR)
192.168.1.0/24
Network (CIDR)
ItemValue
Network address192.168.1.0
Broadcast address192.168.1.255
First usable host192.168.1.1
Last usable host192.168.1.254
Usable hosts254
Total addresses256
Subnet mask255.255.255.0
Wildcard mask0.0.0.255
Prefix length/24
TypePrivate (RFC 1918)
IP class (informational)C
Integer3232235786
Hexadecimal0xC0A8010A
Binary
ItemBinary
IP address11000000.10101000.00000001.00001010
Subnet mask11111111.11111111.11111111.00000000
Network address11000000.10101000.00000001.00000000
Bold bits are the network part, faded bits are the host part.

Split into subnets

/

Membership check

How to use

  1. Type an IP with a prefix length, such as 192.168.1.10/24. A dotted mask also works (172.16.5.4 255.255.240.0), and IPv6 (2001:db8::1/64) goes in the same box.
  2. You get the network address, broadcast address, usable host range and count, subnet mask, wildcard mask and the binary form. Use the Copy button next to a value to take it with you.
  3. Under Split into subnets, enter a new prefix (for example /26) or the number of subnets you need to see the child subnets. The table shows up to 256 rows and tells you how many more there are.
  4. Under Membership check, enter another IP to see whether it falls inside the range.

How the math works

An IPv4 address is a 32-bit integer. A prefix length /n means the first n bits are the network part, and the subnet mask is those bits set to 1.

  • Network address = IP AND mask
  • Broadcast address = network address OR wildcard (the inverted mask)
  • Usable hosts = everything after the network address and before the broadcast

Example: 192.168.1.130/26 has mask 255.255.255.192, network 192.168.1.128, broadcast 192.168.1.191 and hosts 192.168.1.129 – 192.168.1.190 (62 of them). The wildcard mask is 0.0.0.63, which router ACLs use in place of a mask.

CIDR table (/8 – /30)

Prefix Subnet mask Total addresses Usable hosts
/8 255.0.0.0 16,777,216 16,777,214
/12 255.240.0.0 1,048,576 1,048,574
/16 255.255.0.0 65,536 65,534
/20 255.255.240.0 4,096 4,094
/22 255.255.252.0 1,024 1,022
/23 255.255.254.0 512 510
/24 255.255.255.0 256 254
/25 255.255.255.128 128 126
/26 255.255.255.192 64 62
/27 255.255.255.224 32 30
/28 255.255.255.240 16 14
/29 255.255.255.248 8 6
/30 255.255.255.252 4 2

/31, /32 and special ranges

Normally the network and broadcast addresses can’t be assigned to hosts, so two addresses are subtracted from the total. The exceptions: a /31 is a point-to-point link where both addresses are hosts (RFC 3021), so it has 2 hosts, and a /32 is a single host (1). /0 is the entire IPv4 space.

Range Meaning
10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 Private addresses (RFC 1918)
100.64.0.0/10 Carrier-grade NAT shared space
127.0.0.0/8 Loopback
169.254.0.0/16 Link-local (self-assigned when DHCP fails)
224.0.0.0/4 Multicast

The A–E classes date from the classful era. Networks are carved up with CIDR today, so treat the class as informational.

IPv6 basics

An IPv6 address is 128 bits, written as eight 16-bit groups in hex. One run of zero groups can be shortened to ::. This tool follows RFC 5952: only the longest run of zeros is shortened, the first one wins a tie, and a single zero group is never shortened. For example, 2001:db8:0:0:1:0:0:1 becomes 2001:db8::1:0:0:1.

The standard prefix for an ordinary LAN is /64. For 2001:db8:abcd:12::1/64 the network is 2001:db8:abcd:12::/64, holding 2^64 = 18,446,744,073,709,551,616 addresses. A zone ID after %, as in fe80::1%eth0, is just an interface name and is dropped from the calculation.

Related tools: Number Base Converter for binary and hex views, User-Agent Parser for client details, and HTTP Status Codes for response codes.

Addresses you enter are processed in your browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.