How to use
- Type an IP address and press Look up. IPv4 (
8.8.8.8) and IPv6 (2001:4860:4860::8888) both work, and forms with brackets or a port such as[2001:db8::1]:443or8.8.4.4:53are cleaned up for you. - A table shows the network name, assigned range, CIDR, address count, registered country, dates and reverse DNS.
- Look up my IP fills in the address you are connecting from, runs the same lookup, and also shows an approximate location and ISP.
- Use the copy button next to CIDR to move the range into a firewall rule or an allow list.
What is being looked up
IP addresses are allocated in blocks to ISPs and companies by the regional internet registries (ARIN, RIPE NCC, APNIC, LACNIC, AFRINIC and others). This tool fetches that registration record through RDAP, the public lookup protocol, and arranges it so it is easy to read.
| Item | Meaning |
|---|---|
| Network name | The name attached to the allocated block. It may differ from the company name |
| Assigned range / CIDR | The first and last address of the block your IP sits in, and the same range in CIDR form |
| Addresses | How many addresses the range holds. IPv6 is huge, so it is shown as a power such as 2^96 |
| Registered country | The country code registered by the organization that received the block |
| Contact roles | Registrant, technical and abuse contacts and so on. Only the abuse contact shows a public email |
| Reverse DNS | The hostname found by looking up the IP backwards (PTR). Many addresses have none |
Converting a range to CIDR: 10.0.0.1 to 10.0.0.6 is not one block but four, 10.0.0.1/32, 10.0.0.2/31, 10.0.0.4/31 and 10.0.0.6/32. 192.168.0.0 to 192.168.2.255 is 192.168.0.0/23 plus 192.168.2.0/24. To calculate by hand, use the CIDR calculator or the IP subnet calculator.
What this tool does not tell you
- It does not give exact coordinates or an address. The country in the result is registration data of the organization that received the block, not where the person using the address is. A block held by an overseas headquarters and used locally, or the reverse, is common.
- The location shown for your own IP is a separate IP-based estimate. It can be wrong, and with a VPN you will see the VPN server’s location.
- Private IPs (
192.168.x.x,10.x.x.x,172.16-31.x.x), loopback, link-local, carrier-grade NAT and documentation addresses have no registration on the internet, so the browser tells you so before anything is sent. - Registries without RDAP, or data withheld for privacy, may look empty.
What goes to the server, and the limits
Only the IP address you type is sent for the lookup, and it is not stored. The result is not kept in your browser either. The server queries the registries for you, so a request that takes more than 8 seconds is cut off, and requests are limited per IP each minute. This is not a tool for port scanning or for putting load on someone else’s systems.
FAQ
Can an IP address reveal someone’s home address?
No. This tool only shows the registration record of the network an address belongs to, not where a person is. At most it reveals the ISP.
The network name does not match the company name.
The RDAP name is an administrative label for the block and is often an abbreviation or an internal name. Read it together with the registrant in the contacts table.
Why is a private IP not looked up?
An address like 192.168.0.1 is used by countless home and office networks, so no owner is registered for it on the internet. The tool only explains this and makes no server call.
Where can I see my own IP and location?
Open What is my IP, or press Look up my IP here to see it together with the network record. To check whether you connect over IPv6, use the IPv6 check.
Does the same IP show a different country each time?
RDAP is registration data and rarely changes. Location services disagree with each other because each estimates from different data.
The IP you enter goes through the server only for the registry lookup and is not stored.