1. Home
  2. Date & Time
  3. Time Signal

Time Signal

Hear the time by sound and voice at the interval you choose.

For every format and option in one place, use Timers and Clocks →

Runs in your browser · No upload
--:--:--

Stopped

Status
Stopped
Last signal
None yet
1–720

Signals fall on multiples of the interval from midnight on the device clock. With 15 minutes that is :00, :15, :30 and :45.

It only works while this tab stays open. Closing the tab or a sleeping device stops it, and a background tab can be a few seconds late depending on browser settings.

How to use

  1. Type an interval in minutes or press one of the quick buttons: 1, 5, 10, 15, 30 minutes or 1 hour.
  2. Choose what it is aligned to. The clock announces at :00, :15, :30 and :45 for 15 minutes; The start time counts the interval from the moment you press Start.
  3. Pick the announcement (sound + voice, sound only, voice only), the signal sound and the volume, and press Hear the time now to test.
  4. Press Start. The page shows the next signal time and the time left, and announces the time at each moment.

Aligned to the clock or to the start time

Alignment Interval 15 min, started at 10:07 Good for
The clock 10:15, 10:30, 10:45, 11:00 … Chimes that match the wall clock, running meetings and classes
The start time 10:22, 10:37, 10:52 … Checking in at even steps from when you began a task

Clock alignment counts multiples of the interval from midnight on the device clock. 60 minutes is every full hour, 30 minutes is :00 and :30, and 90 minutes gives 01:30, 03:00, 04:30 and so on, each 90 minutes from midnight. An interval that does not divide the day evenly (for example 7 minutes) restarts at midnight. You can enter whole minutes from 1 to 720 (12 hours).

What the voice says

The voice comes from the browser’s speech synthesis (speechSynthesis). On the English page it reads like this.

Time 12-hour 24-hour
15:30 It is 3:30 PM. It is 15:30.
09:05 It is 9:05 AM. It is 9:05.
15:00 It is 3 PM. It is 15:00.
00:00 It is midnight. It is 0:00.
12:00 It is noon. It is 12:00.

Which voice is used depends on the voices installed in your operating system and browser. If the browser has no speech synthesis, only the sound plays and the page tells you so.

Signal sounds

  • Beep beep beep beeeep: three short low beeps followed by one long high tone, like a radio time signal.
  • Ding dong: a soft two-note chime.

The sounds are made in your browser with WebAudio, not from files. When sound and voice are both on, the voice follows once the signal ends. Browser rules mean sound only works after you press Start.

Things to keep in mind

  • It only runs while this tab is open. Closing the tab or a sleeping device stops it. A background tab can be a few seconds late because of browser power saving, and some phones mute sound when the screen turns off.
  • The next signal time is always recomputed from the current time, so after a pause or a sleep no drift builds up. Signals missed in the meantime are announced once.
  • The reference is your device’s system clock, so keep automatic time on.
  • For a fixed focus-and-break rhythm use the Pomodoro timer; for a single alert the timer and alarm fits better.

See the time in large digits with the online clock, check other countries with the world clock, or repeat work and rest rounds with the interval timer.

FAQ

Can it announce every hour on the hour?

Set the interval to 1 hour and choose The clock. For 30 minutes it announces at 00 and 30 past each hour.

I hear no voice.

Check that the browser supports speech synthesis and that a voice for the page language is installed. Also check the device volume and silent mode. Hear the time now lets you test right away. Without speech support it falls back to sound.

Does it need notification permission?

No. It uses only sound and voice, so it works without notification permission.

Does it ring while I work in another tab?

Yes, as long as the tab stays open. A browser may slow background tabs, so it can arrive a few seconds late.

Are my settings saved?

No. What you enter is handled in your browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.