1. Home
  2. Audio & Subtitles
  3. Trim Audio

Trim Audio

Cut the part you need from an MP3 or WAV file and save it.

For every format and option in one place, use Audio Editor & Converter →

Runs in your browser · No upload
Drag on the waveform to choose a range, or type the times. A fade in/out step is included too; turn it off or delete it if you do not need it.
Open an audio file to see its waveform, then stack steps below and save once.
Your file is processed only in this browser and never sent to a server.

How to use

  1. Drop or click to open an MP3, WAV, M4A or OGG file. This page opens with the Trim and Fade in / out steps already added.
  2. Drag on the waveform to choose a range, or type times into the start and end boxes. 1:02.500 and 62.5 both mean 62.5 seconds.
  3. Choose Keep the selection only or Delete the selection, and play the selection to check it.
  4. Turn off or delete the fade step if you do not need it, then pick a format (MP3, WAV, M4A, Opus) under Save and download.

Choosing the range precisely

The start and end handles on the waveform also work from the keyboard. Select a handle and press ←/→ to move 0.1 s, Shift for 1 s, Ctrl for 0.01 s, and Home/End to jump to the ends. Clicking the waveform plays from that point, which helps when you are listening for the place to cut.

For a 10-second file with 2 s to 5 s selected, the results are (checked by running the tool):

Mode Result length
Keep the selection only 3 s
Delete the selection 7 s (the first 2 s joined to the last 5 s)

If the joint clicks, add a fade or move the cut to a quiet spot in the waveform.

Making a ringtone

The Set a 30-second range button selects 30 seconds from the current start. In a 200-second track a start of 10 s gives 10–40 s, and a start of 190 s is pulled back to 170–200 s so it does not run past the end. If the track is shorter than 30 seconds the whole track is selected.

Ringtone length limits differ by device and OS version, so this tool does not promise a specific number. Check your device before using it. How you install the saved MP3, M4A or WAV also depends on the device.

Fade in and out

A fade in raises the start from 0 to full level; a fade out lowers the end to 0. The first and last samples are exactly 0, which reduces the abrupt click at the edges. With a linear 1-second fade in on a steady sound, the 0.5 s point is half the original level. The exponential curve starts more slowly, which usually sounds more natural.

The default is 1 second each; set one to 0 to skip that fade. Placed after the trim step, the fades apply to the start and end of the trimmed result. Changing the step order changes the result, so check the order.

Your file is processed only in this browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.