1. Home
  2. Audio & Subtitles
  3. Remove Silence from Audio

Remove Silence from Audio

Detect and cut silent gaps at the start, end or middle of a recording.

For every format and option in one place, use Audio Editor & Converter →

Runs in your browser · No upload
Silent parts show in red on the waveform. If the threshold is too sensitive, go lower than −45 dBFS; untick a part to keep it.
Open an audio file to see its waveform, then stack steps below and save once.
Your file is processed only in this browser and never sent to a server.

How to use

  1. Drop or click to open an MP3, WAV, M4A or OGG recording. This page opens with the Remove silence step already expanded.
  2. Parts shown in red on the waveform are the silence that will be cut. If the result is not right, adjust the threshold, minimum silence length and margin to keep.
  3. To keep a part, untick it in the list; it turns yellow on the waveform. Turn on Only silence at the start and end to leave silence in the middle alone.
  4. Listen to Original and Result in turn, then save as MP3, WAV or another format.

What the settings mean

Setting Default Meaning
Threshold −45 dBFS A 5 ms stretch whose loudness (RMS) is at or below this counts as silent. Lower values (such as −60) treat only very quiet spots as silence
Minimum silence length 0.5 s Quiet gaps shorter than this are treated as pauses and kept
Margin to keep 0.1 s When cutting, this much silence is left around the sound so speech does not stop abruptly
Only at start and end off When on, only silence at the very start and end is cut

A recording with background noise may never reach −45 dBFS. Try a higher threshold such as −35, and listen to make sure word endings are not clipped.

How the cut works

In a 3-second sound made of a 1-second sine, 1 second of silence and a 1-second sine, the silence is found as one part at 1.000–2.000 s (checked by running the tool). With a 0.1 s margin the result is 2.2 s; with a 0 margin it is 2.0 s. The sound before and after a cut is joined directly, so if the joint is noticeable, increase the margin. Silence touching the very start or end is cut all the way without a margin, and if the whole file is silent the result is empty and cannot be saved.

Silence is detected on the sound entering this step. If you stack trimming or volume steps before it, silence is found in their result.

Order for cleaning up a recording

For podcasts and lectures, remove silence → loudness normalize → MP3 128 kbps works well. Removing silence first keeps quiet gaps from pulling the loudness measurement down. You can stack these steps in the Audio Editor & Converter.

Your file is processed only in this browser and never sent to a server.

Can't find the tool you need?

Tell us what you want to do. We build the most requested tools first.