How to use
- Drop a GIF or click to choose one. One file at a time, up to 50 MB.
- On the left, turn on the checkbox of each edit you need and set its values. Edits you leave off are skipped.
- In the preview on the right, switch between the result and the original and check the size, frame count and duration.
- Press Make GIF to get the result and its file size, then Download GIF. If you change a setting afterwards, a note says the result was made with the old settings, so make it again.
Edits
| Edit | What you can do |
|---|---|
| Resize | Width and height (keep ratio), 75 / 50 / 25% buttons, smooth or pixel-art resampling |
| Crop | Drag a rectangle over the first frame, ratio presets (free, 1:1, 4:3, 16:9), numeric coordinates |
| Range | Pick start and end frames, keep one frame out of every N |
| Speed | 0.25× to 4×, or set every frame delay to one value in ms |
| Reverse | Reverse, or ping-pong (forth and back) |
| Text | Multi-line text, 9 positions, size, color, outline, optionally on some frames only |
| Reduce file size | Colors (256 to 16), dithering, skipping frames, a target size in KB |
Why the order is fixed
Edits are always applied as range → frame skipping → reverse → crop → resize → text → speed → encoding (colors). A fixed order means the same settings always give the same result and each value is easy to interpret.
- Crop coordinates are in the original size, and the resize values apply to the cropped size.
- Text goes on after resizing, so the text size you set is its pixel size in the final picture. The text frame range counts frames of the result after range, skipping and reverse.
- Speed only changes delays, at the end. Frame skipping adds the delays of dropped frames, so the duration stays the same.
Some worked numbers. Take an 8-frame GIF at 100 ms: keep frames 3 to 6, reverse, then 2× speed, and you get 4 frames of 50 ms, 200 ms in total. A 30-frame GIF at 40 ms with every 2nd frame kept becomes 15 frames of 80 ms, still 1,200 ms. Ping-pong on 4 frames plays 1→2→3→4→3→2, six frames, so the first frame is not doubled when it loops. On a 20-frame GIF, picking frames 5 to 14 and keeping every 3rd turns 10 frames into 4 while the duration stays 1,000 ms.
Making the file smaller
GIF has no lossy compression, so a smaller file means less content. The order of impact is size > frame count > colors. Pixels are width × height, so halving both leaves a quarter of the pixels. Frame count is close to proportional to file size, while going from 256 to 16 colors changes it comparatively little. Dithering keeps gradients smoother at low color counts but makes the file larger.
Target size mode first encodes with your settings, and if the result is above the target it lowers colors and size step by step, re-encoding up to 6 times. The loop runs in a worker so the page stays responsive, and every attempt is listed with its colors, size and file size. For example, to bring 800 KB down to 300 KB the first reduction uses 192 colors at 87% of the width and height, the next 128 colors at 77%, and the third 128 colors at 65%. It stops at the first result at or under the target, and if six tries are not enough it shows the smallest one. In that case trim the range or skip frames as well.
Good to know
- Delays are stored as at least 20 ms in 10 ms steps. If a speed-up goes below 20 ms it is set to 20 ms. For example 100 ms at 2× is 50 ms, 30 ms at 2× is 20 ms and 100 ms at 0.25× is 400 ms.
- The repeat count of the original GIF is kept.
- For a GIF with a large width × height × frames, the preview does not refresh by itself. Press Update preview.
- Limits are 1,000 frames, a 2,000 × 2,000 px canvas and 200 million for width × height × frames.
- If your system has Reduce motion on, the preview and the result start paused and move when you press Play.
To build a new GIF from photos use GIF Maker, to save frames as images use GIF Frame Extractor, to convert to MP4 or APNG use GIF Converter, and for ordinary pictures use Resize Image.
Your file is processed only in your browser and is never sent to a server.