How to use
- Enter a domain (
example.com) or a public IP address under Address to ping. If you paste a full URL, only the host is used. - Set the number of packets between 3 and 10. The default is 4, and out-of-range values are moved to the nearest allowed one.
- Tick one or more regions. South Korea is selected by default. With several regions, the results appear side by side in one table.
- Press Start ping. A real measurement probe in each region sends ICMP echo requests to the target. It usually finishes within seconds, and you can Stop it at any time.
- Read min, average and max latency, loss, jitter and the per-packet times, then use Copy result to take the text with you.
Unlike typing ping example.com on your own computer, this measures from data centers in other countries, so it can answer questions such as “how slow is this server from abroad?”
Reading the result
| Field | Meaning | Look at it when |
|---|---|---|
| Min | Round trip of the fastest packet | It is close to the best the distance and path allow |
| Avg | Mean of the packets that came back | The first number to compare between regions |
| Max | Round trip of the slowest packet | A big gap from the average means occasional delays |
| Loss | Share and count of packets that never came back | 0 is normal, repeated loss is a problem |
| Jitter | Average difference between consecutive packet times | Higher means a less steady connection |
A sample run (example.com, 4 packets): the South Korea probe (Chuncheon) saw min 3.19 ms, avg 3.21 ms, max 3.23 ms, 0% loss and 0.02 ms jitter, while the Japan probe (Tokyo) saw min 1.49 ms, avg 1.53 ms, max 1.59 ms, 0% loss and 0.08 ms jitter. Sites behind a CDN answer from a nearby server in each region, which is why the numbers differ for the same address.
Packet loss and jitter
Packet loss is the share of packets that did not return. An occasional 1 to 2% is common, while more than 10% suggests a line problem or an overloaded server, and this tool flags it. With only 3 to 10 packets, a single missing one already looks like 10 to 33%, so raise the packet count and try again if you are unsure. 100% loss does not mean the server is down: many servers and firewalls block ICMP on purpose.
Jitter here is computed by the tool as the average difference between consecutive packet times. It is not the same figure as the mdev that terminal ping prints. Jitter of 30 ms or more, or 5 ms or more and at least half the average, is flagged as unsteady. That threshold is this tool’s own rule of thumb, not a standard. Web browsing barely notices jitter, but video calls and online games do.
What is sent, and the limits
- The address you enter is sent to the measurement service Globalping, and the probe IP is logged by the target server. See the privacy policy for details. Results are not stored.
- Private and internal addresses are not measured. There is an hourly request limit, so pressing the button repeatedly can get you throttled.
- This is a tool for one target, a few probes and a few packets. It is not meant for generating load or scanning ports or networks, and it never repeats measurements automatically.
- ICMP latency is not page speed, because a real page adds server processing and file transfer. To see where along the path it slows down, use Traceroute, and to check the web server itself use the HTTP Header Viewer.
- Probes usually sit in data centers, so the numbers differ from what a home or mobile connection feels.
Frequently asked questions
Ping fails but the website opens. Why?
The server or its CDN is blocking ICMP replies. Ping is a different protocol from web traffic (HTTP), so a failed ping does not mean the site is broken. Check the web side with the HTTP Header Viewer or the Port Checker.
What is a good ping time?
Within one region you typically see single digits up to a few dozen milliseconds, and crossing continents can reach a few hundred, mostly because of physical distance along cables. The absolute number matters less than comparing regions or noticing a sudden rise over time.
Is a test from Korea valid for visitors abroad?
No. Each region has its own path and its own nearest server, which is why you can pick several regions here. If your visitors are abroad, include those regions.
Can this tell whether my own internet is slow?
It measures from a probe to the target, not from your device. For your own line use the Internet Speed Test, and My IP shows which address you appear from.
How do I find the IP behind a domain?
The Address column is the IP the probe actually resolved. For full DNS records use the DNS Lookup.
The address you enter is sent to an outside measurement service (Globalping) and is never stored on this site’s servers.