1. Home
  2. Barcode & Generate
  3. Barcode & QR Reader

Barcode & QR Reader

Read QR codes and barcodes from photos or your camera. Links open only when you choose.

Runs in your browser · No upload
Scan results0
No barcodes read yet.

    How to use

    1. Image files: drop or choose photos with a QR code or barcode, or paste with Ctrl+V. With several photos, every code in each photo is found and added to the list.
    2. Camera: press “Start camera”. Your browser asks for permission, and once allowed, scanning starts with the back camera. When a code is found, a green outline flashes on screen, and devices with vibration give a short buzz.
    3. Copy values from the result list, or save everything as CSV. The camera turns off when you press “Stop camera”, switch to another tab, or leave the page.

    Scan modes and options

    Item What it does
    Continuous Keeps scanning with the camera on. The same value read again within 3 seconds is recorded only once. Good for stock counts.
    Once Turns the camera off right after the first code is read.
    Switch front/back For devices with more than one camera.
    Torch The button appears only when your device and browser support it.
    Save CSV Three columns: time, format, value, with a UTF-8 BOM so Excel shows non-Latin text correctly. Values starting with =, +, - or @ (except plain numbers) get a leading ' so they never run as formulas.

    Supported formats

    Group Formats
    2D QR Code (including Micro QR and rMQR), Data Matrix, Aztec, PDF417
    Retail EAN-13, EAN-8, UPC-A, UPC-E, ISBN, GS1 DataBar
    Industrial and logistics Code 128, Code 39, Code 93, ITF, Codabar

    If your browser has a built-in barcode scanner (BarcodeDetector) it is used first; if it is missing or fails, this page loads zxing-wasm instead. Which formats the built-in scanner supports differs by browser, so the page shows which engine is reading and the formats it supports.

    What is shown for each kind of value

    • Web address: the link is never opened automatically. The domain is shown, and an “Open” button (new tab, noopener) appears only for http and https. If the address uses an internationalized domain (xn--), a warning says it may imitate a real site with look-alike letters.
    • Wi-Fi: a value like WIFI:T:WPA;S:MyNet;P:secret123;; is broken into network name (SSID), security type, password and hidden flag. Escaped characters such as \; are handled.
    • Contacts: vCard (BEGIN:VCARD) and MECARD are shown as a field table with name, phone, email and so on.
    • GS1 data: with a ]C1 prefix or FNC1 separators, the value is split by AI and linked to the GS1 Barcode Parser.
    • EAN and UPC: the check digit is verified. For example 9501101530003 is valid, while 9501101530004 with a different last digit is reported as not matching. A prefix of 880 is noted as a number issued by GS1 Korea (it is not the country of origin).

    Getting a clean read

    • Make the code large enough in the frame and wait until it is in focus.
    • Glare, shadows and creases get in the way. Tilt glossy packaging slightly to avoid reflections.
    • A barcode needs its whole row of bars and the blank margins (quiet zones) on both sides in the picture. Cropped codes will not read.
    • In low light use the torch or move somewhere brighter. When scanning a QR on a screen, raise its brightness and adjust the distance to avoid moiré stripes.
    • The camera works only on secure (HTTPS) pages.

    Why QR codes deserve caution

    You cannot read a QR code by eye, so they are used to send people to fake payment or login pages. That is why this tool never opens a scanned link by itself and shows the address first. Before opening, check that the domain is the one you expect. Be especially careful with QR codes covered by a sticker or received from strangers.

    Related tools: Barcode Generator, QR Code Generator, GS1 Barcode Parser, GTIN Check Digit Calculator.

    Your photos and camera video are processed only in your browser and are never sent to a server.

    Can't find the tool you need?

    Tell us what you want to do. We build the most requested tools first.