How to use
- Enter the weight you lifted and the reps you completed to failure. The unit (kg or lb) only changes the label; the math is the same.
- Pick a main formula and the estimated 1RM appears in large type. Epley, the most widely used, is the default.
- The table below compares all seven formulas, and a second table shows the weight for each rep count under your chosen formula.
- To match your plates, choose a rounding step (1, 2.5 or 5).
This calculator is for general fitness reference and is not a medical diagnosis or exercise prescription.
What 1RM means
1RM (one-repetition maximum) is the heaviest weight you can lift once. Testing it directly carries injury risk, so formulas estimate it from a lighter set done for several reps. With weight w and reps r:
| Formula | Equation |
|---|---|
| Epley | w × (1 + r ÷ 30) |
| Brzycki | w × 36 ÷ (37 − r) |
| Lander | w × 100 ÷ (101.3 − 2.67123 × r) |
| Lombardi | w × r^0.10 |
| Mayhew | w × 100 ÷ (52.2 + 41.9 × e^(−0.055 r)) |
| O’Conner | w × (1 + 0.025 × r) |
| Wathan | w × 100 ÷ (48.8 + 53.8 × e^(−0.075 r)) |
With one rep, the weight is already your 1RM so no formula is applied. Each formula rests on different assumptions, so the same set gives slightly different answers.
Example: 80 kg for 5 reps
| Formula | Estimated 1RM |
|---|---|
| Epley | about 93.33 kg |
| Brzycki | 90.00 kg |
| Lander | about 90.97 kg |
| Lombardi | about 93.97 kg |
| Mayhew | about 95.21 kg |
| O’Conner | 90.00 kg |
| Wathan | about 93.27 kg |
The seven formulas span 90.00 to 95.21 kg, with an average of about 92.39 kg. Thinking in a range like this is more realistic than trusting one number.
Weight for each rep count (Epley)
The share of 1RM is 100 ÷ (1 + r ÷ 30) percent.
| Reps | Of 1RM |
|---|---|
| 3 | about 90.9% |
| 5 | about 85.7% |
| 8 | about 78.9% |
| 10 | 75.0% |
| 12 | about 71.4% |
With a 93.33 kg 1RM, the same formula gives about 80 kg for 5 reps and 70 kg for 10. Strength work usually sits in lower rep ranges and hypertrophy in the middle, but goals and experience vary, so treat this table only as a starting point for choosing weights.
Things to keep in mind
- Sets above 10 reps depend heavily on endurance, so error grows. Estimates from 3 to 8 reps are the most reliable.
- Your true 1RM can differ by 10% or more depending on the lift, sex, experience and how you feel that day. Squats, deadlifts and the bench press fatigue differently across reps.
- When you try an estimated max, use a spotter or safety bars and warm up well. Stop at once if you feel pain, dizziness or chest tightness and talk to a medical professional.
- The formulas use commonly published coefficients. Reference date: October 2026. The formulas themselves do not change, but training recommendations can shift with new research.
For weight management see the calorie calculator, and for body composition the body fat calculator.
FAQ
Which formula is the most accurate?
There is no single answer. In the 3 to 8 rep range Epley and Brzycki usually agree closely. Look at the range of all seven, and use the lowest if you want to stay conservative.
How do I choose training weights from my 1RM?
Multiply your 1RM by the percentage for your target rep count. The second table does that for you. Start slightly lighter than the calculated number to check your form.
How many reps can I enter?
From 1 to 30. The Brzycki formula breaks down at 37 reps, so there is an upper limit, and a warning appears above 10 reps.
Is my input stored anywhere?
No. Your numbers are processed in your browser only and never sent to a server.