How to use
- Choose where it was measured: Clinic for a reading taken at a doctor’s office, or Home for a home monitor.
- In the readings box, write one reading per line as systolic/diastolic, for example 128/82, in mmHg. “128 82” and “128,82” also work.
- If you list several readings, their average is classified.
- You see the stage, a short note, pulse pressure and mean arterial pressure. With two or more lines, a table classifies each reading too.
This tool is not a diagnosis. If your numbers worry you, talk to a doctor.
Classification (Korean Society of Hypertension guideline 2022, clinic readings)
| Category | Systolic | Condition | Diastolic |
|---|---|---|---|
| Normal | under 120 | and | under 80 |
| Elevated | 120 to 129 | and | under 80 |
| Pre-hypertension | 130 to 139 | or | 80 to 89 |
| Hypertension stage 1 | 140 to 159 | or | 90 to 99 |
| Hypertension stage 2 | 160 or more | or | 100 or more |
| Isolated systolic hypertension | 140 or more | and | under 90 |
When the two numbers fall in different stages, the higher stage applies. For example, 118/92 is stage 1 because the diastolic value is in the 90 to 99 range. Isolated systolic hypertension is not a separate stage but a type in which only the systolic value reaches 140 while the diastolic stays under 90, and the tool shows it beside the stage. As of October 2026; the guideline can be revised, so check the society’s current guidance.
Examples
| Reading | Result |
|---|---|
| 119/79 | Normal |
| 125/75 | Elevated |
| 128/82 | Pre-hypertension (diastolic 80 to 89) |
| 140/89 | Stage 1, isolated systolic hypertension |
| 150/100 | Stage 2 (diastolic 100 or more) |
Three readings of 128/82, 132/84 and 125/80 average to 128 over 82, which is classified as pre-hypertension.
Home readings
Pressure taken at home tends to run lower than at a clinic, so the threshold differs. The Korean Society of Hypertension treats a home average of 135/85 or higher as meeting the hypertension criterion. Home mode compares against that and reports at or above versus below, without clinic stages. Take your log, averaged over several days, to your doctor.
Measuring accurately
- Sit and rest for at least 5 minutes first.
- Avoid coffee, exercise and smoking for 30 minutes beforehand.
- Sit with your back supported, feet flat, and your arm at heart level. Do not talk.
- Use a cuff that fits your arm, and use the same arm each time.
- Look at the average of several readings rather than one high number.
Things to keep in mind
- If the reading is 180/120 or higher with chest pain, shortness of breath, a severe headache, vision changes, weakness or slurred speech, call emergency services at once. Even without symptoms, contact a clinic the same day if you can.
- These categories are for adults. Children, teens and pregnancy use different criteria.
- Low blood pressure is not covered by this table. If you have dizziness or fainting, see a doctor.
- If you already take blood pressure medication, do not change or stop it based on this result.
- For reference only, with no legal or medical force and no diagnostic value.
FAQ
What is a normal blood pressure?
For clinic readings, a systolic value under 120 with a diastolic value under 80. A reading of 120 to 129 over under 80 is elevated.
One reading was high. Do I have hypertension?
No. A single value changes easily with stress, exercise, coffee and posture. Diagnosis rests on repeated measurements and an exam, so have it checked at a clinic.
What are pulse pressure and mean arterial pressure?
Pulse pressure is systolic minus diastolic, and mean arterial pressure is (systolic + 2 × diastolic) ÷ 3. They are reference figures and this tool does not classify by them.
How many readings should I average?
This tool does not require a set number. Several readings under the same conditions give a steadier average. Follow your own clinician’s advice on how to log them.
What about weight or calories?
Try the BMI calculator, the calorie calculator and the water intake calculator. If you only need the mean of several numbers, the average calculator does it.
The readings you enter are processed in your browser and never sent to a server.