How to use
- Drop a DXF file or click to choose one. Both ASCII and binary DXF are read.
- Drag to pan, and use the mouse wheel or a two-finger pinch to zoom. Double-click fits the whole drawing. On the keyboard, arrow keys pan,
+and-zoom, and0fits all. - Use the layer list to switch layers on and off. The number next to each color swatch is how many entities were drawn on that layer.
- Turn on Measure distance and click two points on the drawing to see the distance and the horizontal and vertical difference in drawing units. Hovering shows the drawing coordinates at the bottom left.
- Save PNG (current view, or the whole drawing at 2K, 4K or 8K) or SVG.
If you open a DWG file, the tool shows file information instead of the drawing. See “Why DWG is not opened” below.
What is drawn and what is not
| Entity | Handling |
|---|---|
| LINE, LWPOLYLINE, POLYLINE | Lines and polylines. Bulge segments are expanded into arcs |
| CIRCLE, ARC, ELLIPSE | Curves approximated with a point every 3° |
| SPLINE | A B-spline when the knot data is complete, a smooth curve through fit points otherwise, or the control polygon (weights are ignored) |
| TEXT, MTEXT | Format codes (\P line break, {\f...;} font, \H height, %%c ⌀ and so on) are cleaned up and the text is drawn in a generic font, honoring height, rotation and alignment |
| INSERT | Blocks are expanded recursively with scale, rotation and row/column arrays. Circular references and nesting deeper than 12 levels stop |
| DIMENSION | The block that the dimension references is drawn |
| HATCH | Solid fills are filled; patterned hatches show their boundary only |
| SOLID, POINT | Filled quads and triangles, and points |
Not supported: the DWG drawing itself, 3D solids and meshes, external references (XREF), SHX font shapes (a generic font is used instead), line types (dashed lines are drawn solid) and attached images. Entities that could not be drawn are listed by type and count. Only model space is drawn; a layout (paper space) is drawn only when model space is empty.
Colors and line weights
- Both AutoCAD color numbers (ACI 0–255) and true color are read. ACI 1 is red (#ff0000), 2 yellow, 3 green, 4 cyan, 5 blue, 6 magenta, and 7 is white/black.
- ACI 7 follows the background: white on the black background, black on the white one. Very dark (or very light) colors that would disappear into the background are swapped the same way.
- BYLAYER uses the layer color; BYBLOCK uses the color of the INSERT that placed the block. Entities on layer
0inside a block follow the layer of that INSERT. - Lines are 1 px by default. Real line weights applies the weight set on each entity (1/100 mm), limited to 1–8 px.
How curves are drawn | bulge
Each polyline vertex can carry a bulge value that describes the arc to the next point. The bulge is the tangent of a quarter of the arc’s included angle. A bulge of 1 is a 180° half circle, and about 0.4142 (tan 22.5°) is a 90° arc. A positive bulge runs counter-clockwise. With start (0,0), end (2,0) and bulge 1 you get a half circle with center (1,0) and radius 1, bulging below the chord because the sign is positive.
Why DWG is not opened
DWG is Autodesk’s proprietary format with no official public specification, and there is no freely licensed parser that fits a browser (the widely used LibreDWG is GPL). So this tool does not interpret DWG drawings. It reads two things only.
| Header string | AutoCAD version |
|---|---|
| AC1015 | 2000 |
| AC1018 | 2004 |
| AC1021 | 2007 |
| AC1024 | 2010 |
| AC1027 | 2013 |
| AC1032 | 2018 and later |
The second is the embedded preview image. DWG files from R13 onward record where the preview is stored in the header; PNG and BMP previews are shown as they are (WMF cannot be displayed). The preview is a snapshot from the last save, so it can differ from the drawing. For the full drawing, use Save As → DXF in your CAD program and open that file here.
Non-ASCII DXF and large drawings
DXF files saved by older Korean-locale software ($DWGCODEPAGE ANSI_949) use CP949 rather than UTF-8. When a file cannot be read as UTF-8 it is decoded as CP949 so layer names and text are not garbled. Very large drawings (more than 600,000 shapes or about 4 million points) are drawn in part and the tool says so. PNG export is reduced to stay within the browser canvas limit (about 16.8 million pixels): a square drawing requested at 8K is saved at 4096×4096 px, while a 2:1 drawing saved at 2K is 2048×1024 px.
Related tools
- 3D Model Viewer | STL, OBJ, GLB and other 3D files
- SVG to PNG | turn the saved SVG into a PNG at any size
- PDF Viewer | when you were sent the drawing as a PDF
- File Type Checker | check files whose extension and real format differ
Your files are processed only in your browser and are never sent to a server.