How to use
- Drop or click to open a video file. This page opens with the Resolution & frame rate step added and Quality under Save set to Target size (10 MB by default).
- Type the target size in MB. The Discord 10 MB, Email 25 MB, KakaoTalk 300 MB buttons in the resolution step set the target to that value. Real limits of each service can change, so check before uploading.
- Lower the resolution (1080p to 240p) and frame rate (30, 24 or 15 fps) if you want. The aspect ratio is kept.
- Check the estimated size and press Create.
How the target size is calculated
Video bitrate = (target MB × 8 × 1024² ÷ seconds) × 0.97 − audio bitrate. The 0.97 leaves room for container overhead and variable-bitrate error. The audio bitrate is lowered as the target gets smaller (48 kbps when the total is under 400 kbps, 64 kbps under 800 kbps, 96 kbps under 1.5 Mbps, otherwise 128 kbps) so more goes to the picture, and it is never raised above the original. Here 1 MB is 1024 × 1024 bytes.
These values are for a 1920×1080, 30 fps source with 128 kbps audio, calculated by running the tool.
| Length | Target | Video | Audio | At this resolution |
|---|---|---|---|---|
| 60 s | 10 MB | about 1.26 Mbps | 96 kbps | 720p or lower advised |
| 180 s | 10 MB | about 388 kbps | 64 kbps | 360p advised |
| 300 s | 25 MB | about 614 kbps | 64 kbps | 480p advised |
| 600 s | 25 MB | about 291 kbps | 48 kbps | 360p advised |
| 30 min | 300 MB | about 1.26 Mbps | 96 kbps | 720p advised |
If the bitrate per pixel would be too low, the picture turns mushy, so when the current resolution looks too ambitious a lower-resolution suggestion appears with a button. The video bitrate floor is 150 kbps. When the target falls below that, such as 5 MB for 600 seconds, the video is encoded at the floor and the result can come out larger than the target (about 14,850,000 bytes here); a warning appears together with a 240p suggestion.
Quality levels
Instead of a target size you can pick a quality level. The bitrate is frame size × frame rate × bits per pixel (high 0.11, medium 0.07, low 0.045), adjusted for codec efficiency (H.265 0.7×, VP9 0.75×, AV1 0.6×) and capped at the original bitrate. For 1080p at 30 fps with H.264 that is about 6.84 Mbps for high, 4.35 Mbps for medium and 2.80 Mbps for low. Keep original scales the original bitrate by the size of the result.
Tips
- Dropping just one step (for example 1080p to 720p) makes the picture much sharper at the same file size.
- If you do not need sound, add a Volume step under Add a step and choose Remove sound (see Change Video Volume); that budget then goes to the picture.
- Add a Trim step to cut unneeded start and end (Trim Video). A shorter video gets better quality at the same size.
Related tools
Video Converter · Trim Video · Crop Video · Video to MP3 · Change Video Volume
Your file is processed only in this browser and never sent to a server.