How to use
- Enter a HEX color code or pick a color with the color picker. Other formats such as
rgb(217 195 160)are read too. - Under Nearest paint color families, see a general family name such as beige, greige or sage, plus a description of lightness, saturation and temperature.
- Under Mixing ratio guide, see a starting ratio that uses five basic colors: white, yellow, red, blue and black. The target and expected colors are shown side by side with the color distance (ΔE) and a short verdict.
- Copy ratio copies text such as
White 2 : Blue 1for your notes or a conversation at the store.
What this tool does and does not do
This tool does not give brand color codes or product names. Every brand has its own names and numbering, and the actual color data belongs to each company. Instead it describes what to look for in plain terms: a general color family, a tone and a ratio of basic colors. For an accurate match you need a store’s tinting service, a physical swatch or a color scanner.
Families and tone
The 37 families run from white, off-white, ivory, cream, beige, sand and greige through warm and cool grays, charcoal, red, burgundy, coral, pink, orange, terracotta, mustard, olive, green, sage, mint, teal, sky blue, navy, lavender and purple to brown. The tool measures the Lab distance between your color and each family’s representative color and shows the three closest.
Tone is derived from OKLCH values. Lightness has five levels from very light to very dark, saturation has four levels from close to neutral through muted and moderate to vivid, and temperature is warm toward red and yellow, cool toward teal and blue, and in between otherwise.
How the mixing ratio is calculated
The on-screen approximations of the five basic colors are white #fbfbf8, yellow #f2c40a, red #c1272d, blue #1f48b0 and black #1a1a1a. Colors other than white are combined as a weighted geometric mean of linear values, imitating light being absorbed in layers, and white then lightens that result by its share of the total in sRGB values. The tool tries every reduced whole-number ratio with up to 12 parts white, 3 black, 6 each of red, yellow and blue, and 18 parts in total, then picks a simple ratio with a small color distance.
| Target | Nearest family | Ratio | Expected | ΔE |
|---|---|---|---|---|
#a6c8f0 |
Sky blue | White 2 : Blue 1 | #b2bfe0 |
7.5 |
#808080 |
Gray | White 1 : Black 1 | #8b8b89 |
4.4 |
#ee8a24 |
Orange | Yellow 3 : Red 1 | #e58710 |
4.5 |
#fffacd |
Cream | White 4 : Yellow 1 | #f9f0c8 |
4.1 |
#6e4a32 |
Brown | Red 4 : Blue 4 : Yellow 3 | #704e39 |
2.9 |
#d9c3a0 |
Beige | White 8 : Yellow 3 : Red 1 : Black 1 | #d6c19f |
1.0 |
#ff5b1f |
Red | Yellow 1 : Red 1 | #d85c18 |
16.5 (hard to match) |
A ΔE below 6 is called quite close, below 14 similar, and anything above is only a direction. Very vivid colors such as #ff5b1f lose saturation when basic colors are mixed and cannot be reached, so ready-made pigments are a better route for them.
Things to keep in mind
- The ratio is a starting point from a simple model. It ignores the real optical behavior of the paint, its gloss and how it changes when dry, so test small batches and adjust gradually.
- A HEX value on screen depends on brightness, color profile and night mode, so it never matches real paint exactly.
- To work out how much paint a wall needs, use Paint Calculator.
- To learn what a color is called, try Color Name Finder. For a blend of two colors, use Color Mixer. To choose a color, use Color Picker.
Frequently asked questions
Does it convert a HEX code to a paint color number?
No. It does not cover any brand’s color numbers or product names. It is a reference that offers a nearby general color family, a tone description and a basic-color mixing ratio.
Why does a screen color differ from real paint?
A screen emits light while paint reflects it. Display settings, room lighting, finish and the change after drying all differ, so the two cannot match exactly. Check with a small test patch.
Is the ratio by volume or by weight?
For the same kind of paint, starting with a volume ratio is fine. The ratio is a guide, so mix a small amount and adjust by eye.
Is my color sent to a server?
No. All calculations run in your browser and nothing is sent to a server.